![]() If you’re still having trouble, order a remote control. If you can't locate the red button, unplug the receiver's power cord from the electrical outlet.Most DIRECTV receivers have a red button inside the access card door or on the side of the receiver.Your remote should now be paired and you can change to IR or RF. Wipe the top of the remote and use the same type of cloth to wipe the front panel of your receiver. Clean the remote control's emitter and the receiver’s sensor with a soft, lint-free cloth.The sensor is on the front of the receiver, and the emitter is on top of the remote. Make sure nothing blocks the path between the receiver’s sensor or the remote’s emitter.If anything blocks the receiver, it can affect how well the remote responds. The remote uses light to send the signal to the receiver. Press and hold the red button until the receiver restarts. On most DIRECTV receivers, there is a red button on the side of the receiver or inside the access card door. If not, make sure it’s powered on and troubleshoot your receiver. If the buttons on your remote are not responding, try resetting the receiver and remote control. If it works, continue with the steps below. Go to your receiver and press the Guide button on the front panel. If none of these options work, you may need to program your remote. ![]() Slide the mode switch to the input symbol (for example TV, AV1, or AUX). If your remote controls your receiver but doesn’t work on other devices, change the input mode.At the top of the remote, slide the mode switch all the way to the left to the DIRECTV symbol.Next, make sure your remote is set to control your DIRECTV receiver: Remove the battery cover and insert two new AA batteries.Ĭhange Mode on the RemoteIf your remote is not responding, changing channels or adjusting the volume, make sure you have direct line of sight to the receiver. A slow, blinking green light or no light - your remote needs new batteries.A fast blinking green light - the batteries are okay but may need to be replaced soon.A solid green light - the batteries are strong.Check batteriesTo test your batteries, press and hold any button on your remote. Run your fingers across each button to make sure none are stuck in the pressed-down position.
0 Comments
Leave a Reply. |